KLF-JSQ-01 220V Lightning Strike Counter for Lightning Arrester
with LED Working State Indicators
This product has the lightning counter function, after the
lightning surge current go by the counter induction coil, the
counter induced current and then cumulative the number of lightning
|Starting current (8/20µs)||1KA|
|Working Voltage (Un)||220V|
|Operating temperature||Temperature -40°C ~+85°C; Relative humidity<95%|
1.Must cut off power before installation, power operation is
strictly prohibited. 2.The installation style is using 35 mm guide
3.According to the diagram when you instal, the L(the six feet on
the surge counter)is phase line N(the five feet on the surge
counter)is null line.
4.Two lead wire of the sensor coil connect with the foot 1 and 2
(sampling)of the surge counter, can be arbitrary connection, after
the earth line through the sensing coil then can be connected with
the earth mat.
5.It will be in the condition of "00" after the production is be
charged with electricity(or use the power cord connect with the 3
feet and 4 feet), the starting current of flash counter can not
less than 1 ka press button for reading, digital tube should be cut
off for save electricity, the reading button shows number of
6.Non-professional workers do not disassemble.
Dimention & Diagram