12V/24V/220V Network Surge Protection Device for CCTV Camera
Two-in-one SPD is applied to the lightning surge protection for
power and network cord of monitoring system front-end network
camera and wireless remote control camera.
- Integrated and multi functional surge protection be provided for
power and network line of 12V network camera.
- Power and network integration surge protection design to
effectively balance the lines potential difference.
- It can effectively avoid the equipment destroyed which is caused by
potential difference enlargement between power and network line.
- Core components are selected international brands, with advantage
of multi-level protection, low residual voltage, fast response time
and life working time.
- With advantage of integration, small size, simple wiring and easy
|Protective range||Power Supply||Network|
|Working Voltage (Un)||24V||5V|
|Nominal Discharge Current (8/20μs) (In)||5KA|
|Max. Discharge Current (8/20μs) (Imax.)||10KA|
|Insertion Loss||≤0. 2dB|
|Voltage Protection Level( Up)||≤150V||≤10V|
|Protected Core||1,2,3, 6 lines|
|Working Environment||Temperature -40°C~+80°C;Relative humidity<95%|
|Shell Material||Aluminium Alloy|
Note:the 2 in 1 power and network CCTV SPD voltage could be
12v,24v,220v;there are also 3 in 1 power,control signal and video
CCTV surge protectors!
Product dimention & Diagram